SCF870/20 /21 /22 /23
9-9
7th operation Closing the bottom lid
- Pull the power cord outwards to pull out the extra cable inside the block.
- Align the feeder on the lid with the cavity on the body and place the bottom lid in position.
- Tighten 1 piece of 3,5 x 13 special safety screw, as well as 3 pcs of 3,5 x1 3 screws with a torque between 0.72 - 0.84 Nm.
8th operation Place the water cap.
- Place the water cap by gently pushing its pins into holes on the body.
Check the operation and switches of the device after assembly.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
