Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
10
To ensure that the pump
is completely stable, you
can use the stand with the
4 oz/125 ml milk container.
Let-down Massage Cushion
White stand
Milk container
3
4
Screw the pump body onto the milk
container until securely in place.
The Let-down Massage Cushion has petals
that flex in and out to gently massage the area
around the breast. This is intended to help
stimulate a fast, natural milk flow. When using
the breast pump without the Let-down Massage
Cushion, the maximum vacuum level achievable
will be higher.
Parts you will need for this step:
White valve
Clear silicone diaphragm
Double pumping? Assemble two pumps as shown below.
Single pumping? Assemble one pump as shown below.
Pump body
9
Before assembling, make sure that you have correctly washed and sanitized the pump.
See section titled ‘Cleaning and Sanitizing Your Pump’ on page 6.
1
2
Insert the white valve into the pump body,
so that it fits securely into the small round
hole. Make sure the pointed side of the
valve is facing down.
Fit the clear silicone diaphragm into the
pump body. Ensure a perfect seal around
the rim by pressing down with your
fingers.
(This is easier if assembled while
the diaphragm is wet.)
Assembling the Pump Body
Assembling the Pump Body
