2
To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.
lullabies function
1
Press the play/stop button
E
on the baby unit to play the currently selected
lullaby. (Fig. 28)
2
To select another lullaby, press the lullaby button
K
on the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 29)
Note: If you do not press the lullaby button
K
for more than 2 seconds, the lullaby shown on the display
starts to play.
The number of the lullaby appears on the display together with the lullaby symbol
K
.
The lullaby repeats continuously.
To stop the lullaby, press the play/stop button
E
on the baby unit again. (Fig. 28)
The number of the lullaby and the lullaby symbol
K
disappear from the display.
To select another lullaby when a lullaby is playing:
Press the lullaby button
K
on the baby unit within 2 seconds to toggle through the list of
lullabies.
Note: If you do not press the lullaby button
K
for more than 2 seconds, the lullaby shown on the display
starts to play.
humidity
When there is a connection between the baby unit and the parent unit, the humidity level is shown
on the display of both units.
The optimal humidity level is between 40% and 60%. It is very important to maintain the correct
humidity level as it helps to protect your baby from irritation of the mucous membranes, dry and
itchy skin, chapped lips and a dry, sore throat. When the mucous membranes do not function
optimally, they cannot give your baby full protection from all kinds of germs. This increases the
chance of your baby catching a cold or the flu, and reduces its resistance to infections from mold
and bacteria.
Note: The baby monitor only measures the humidity level. You cannot adjust the humidity level with the
baby monitor.
Out of range alert
When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the message ‘Not linked’ appears on the display. The LINK light on the parent unit lights up red.
Note: The message ‘Not Linked’ also appears on the display of the parent unit when the baby unit is
switched off.
Menu options
The following functions are operated in the menu of the parent unit.
Menu operation - general explanation
Note: Menu functions can only be operated when a connection has been established between the baby
unit and the parent unit.
1
Press the MENU button to open the menu (Fig. 0).
The first menu option appears on the display.
2
Use the – and + buttons to select the desired menu option (Fig. 1).
,
,
,
-
,
EngliSh
1
Note: The arrow indicates in which direction you can navigate.
Press the OK button to confirm (Fig. 32).
Use the + and - buttons to select the desired setting.
Press the OK button to confirm.
The new setting flashes twice and then disappears from the display.
Press the MENU button again to exit the menu.
Adjusting microphone sensitivity
Note: You can only adjust the microphone sensitivity in the menu of the parent unit.
You can set the microphone sensitivity of the baby unit to the desired level. You can only change the
microphone sensitivity when a connection between the baby unit and the parent unit has been
established, i.e. when the LINK light on the parent unit lights up green continuously.
1
Select ‘Sensitivity’ with the + and - buttons.
2
Press the OK button to confirm.
Select the desired microphone sensitivity level for the baby unit with the + and - buttons.
h = minimum sensitivity level
i = maximum sensitivity level
Press the OK button to confirm.
The message ‘Saved’ appears on the display.
Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and
therefore transmits more often. As a result, the units consume more power.
Sound alert on/off
Note: You can only switch the sound alert on and off in the menu of the parent unit.
This feature allows you to monitor your baby silently. It enables you to switch off the volume on
your parent unit and still be alerted if your baby cries.
If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights
up while the volume is switched off. In addition, the backlight of the parent unit display goes on and
the sound alert symbol (
g
) flashes on the display.
1
Select ‘Sound Alert’ with the + and - buttons.
2
Press the OK button to confirm.
If the alert is off, the display shows ‘On?’. Press the OK button to switch on the alert. If the
alert is on, the display shows ‘Off?’. Press the OK button to switch off the alert.
If you have set the sound alert to ‘on’, the sound alert symbol (
g
) appears on the display
of the parent unit.
Setting room temperature range
Note: You can only adjust the temperature range in the menu of the parent unit.
A baby will sleep comfortably in a room heated to a temperature between 61°F (16°C) and 68°F
(20°C). This is important, since a baby cannot regulate its body temperature as well as an adult. A
baby needs more time to adjust to temperature changes.
If you do not set a temperature range, the baby monitor alerts you when the temperature in your
baby’s room drops below 57°F (14°C) or rises above 86°F (30°C). In this case, the backlight of the
parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default
minimum and maximum temperature, follow the instructions below.
Note: The temperature of the baby’s room is shown on the display of both units when they are linked.
,
,
,
,
,
EngliSh
17
