Cleaning and maintenance
Do not immerse the parent unit or the baby unit in water and do not clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1
Unplug the baby unit if it is connected to an electrical outlet and take the parent unit out of
the charger.
2
Clean the parent unit and the baby unit with a damp cloth.
Make sure the parent unit is dry before you put it back into the plugged-in charger.
Clean the charger with a dry cloth.
Clean the adapters with a dry cloth.
Note: This appliance has no other user-serviceable parts. For assistance call 1- 800-54-AVENT (1-800-
542-8368).
Storage
When you are not going to use the baby monitor for some time, remove the non-rechargeable
batteries from the baby unit and remove the rechargeable battery pack from the parent unit.
Store the parent unit, the baby unit, the charger of the parent unit and the adapters in the travel
pouch supplied.
Do not wrap cord around the monitor when storing. Store cord in a safe location where it will
not be cut or damaged.
Replacement
Baby unit
Batteries
Only replace the non-rechargeable batteries of the baby unit with four 1.5V R6 AA batteries.
Note: We recommend you to use Philips non-rechargeable batteries or an equivalent type.
Adapter
Only replace the adapter of the baby unit with an adapter of the original type. For assistance call 1-
800-54-AVENT (1-800-542-8368) or visit our website: www.philips.com/AVENT.
Parent unit
Battery pack
Only replace the SCD530 Li-Ion rechargeable battery pack of the parent unit with a pack of the
original type. For assistance call 1-800-54-AVENT (1-800-542-8368) or visit our website: www.
philips.com/AVENT.
Adapter
Only replace the adapter of the parent unit charger with an adapter of the original type. For
assistance call 1-800-54-AVENT (1-800-542-8368) or visit our website: www.philips.com/AVENT.
Assistance
For assistance call 1-800-54-AVENT (1-800-542-8368) or visit our website: www.philips.com/
AVENT.
Environment
Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated. Do not
wrap in metal or aluminum foil. Wrap in newspaper before discarding (Fig. 35).
-
-
-
EngliSh
20
It is suggested that you contact your local town or city to determine proper battery redemption
site(s) in your area.
Warranty
FUll TWO YEAR WARRAnTY
Philips Electronics North America Corporation (USA) and Philips Electronics Ltd (CANADA)
warrant each new Philips AVENT product, model SCD530/00, against defects in materials or
workmanship for a period of two years from the date of purchase, and agrees to repair or replace
any defective product without charge. IMPORTANT: This warranty does not cover damage resulting
from accident, misuse or abuse, lack of reasonable care, or the affixing of any attachment not
provided with the product. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply call toll-free 1-800-
54-AVENT (1-800-542-8368).
Frequently asked questions
This chapter lists the questions most frequently asked about the appliance. If you cannot find the
answer to your question, call 1-800-54-AVENT (1- 800-542-8368) for assistance.
Question
Answer
Why don’t both the
power-on light of the
baby unit and the LINK
light of the parent unit
come on when I press
the on/off buttons of the
units?
Perhaps the rechargeable battery pack of the parent unit is empty and
the parent unit is not in the plugged-in charger. Insert the small
appliance plug into the charger, put the adapter of the charger in a
wall outlet and place the parent unit in the charger. Then press the on/
off button to establish connection with the baby unit.
Perhaps the non-rechargeable batteries of the baby unit are empty
and the baby unit is not connected to a power outlet. Replace the
non-rechargeable batteries or connect the baby unit to a power
outlet. Then press the on/off button to establish connection with the
parent unit.
The baby unit and the parent unit may be out of range of each other.
Move the parent unit closer to the baby unit, but not closer than 3
feet/1 meter.
If the LINK light on the parent unit still does not start to flash, use the
reset function to reset the units to their default settings.
Why does the LINK light
on the parent unit light
up red continuously and
why is the message
‘Not Linked’ shown on
the display?
The baby unit and the parent unit are out of range of each other.
Move the parent unit closer to the baby unit.
The baby unit may be switched off. Switch on the baby unit.
Why does the battery
symbol flash on the
display of the baby unit?
The non-rechargeable batteries of the baby unit are running low.
Replace the non-rechargeable batteries or connect the baby unit to a
power outlet (see chapter ‘Preparing for use’).
-
EngliSh
21
