English
9
AC/DC ADAPTER
1
Make sure the local voltage corresponds to the
4.5 V
adapter's voltage. The 1.3 mm center pin (in the
4.5V DC
jack on the set) must connect to the
positive pole
+
of the
supplied adapter with 3.5 mm jack.
2
Connect the adapter to the set's 4.5V DC jack and a wall
power outlet.
™
message may appear briefly on the display.
3
Always disconnect the adapter from the AC wall power
outlet if you are not using it.
(See Fig. 1 on page 3)
You can store up to 120 minutes of music on the card, erasing
and overwriting as you want.
Make sure the set is
off
before inserting or removing the card.
• Insert a SmartMedia card into
CARD INSERT
with the
clipped corner of the card aligned as shown on the set.
Display shows:
™
– if your card is blank.
™
card details if card already contains files.
™
– if format is incompatible with the set.
™
– the track is not an audio track or your card is
blank.
• Ejecting: Slide the
CARD EJECT
switch up and remove the
card.
4
.5
V
DC
H
O
L
D
DISP
LAY
MO
DE/E
Q
YES
USING YOUR SMARTMEDIA CARD
XP SA 107/17 11-07-2000 11:11 Pagina 9
