Mechanical Instructions
4.
4.3
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never
only the
display.
Caution:
Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.4
Assy/Panel Removal Matisse Styling
(8000 series)
The instructions apply to the Q552.1E LA chassis
(40PFL7605H/12), but are similar for other models.
4.4.1
Rear Cover
Warning:
Disconnect the mains power cord before you remove
the rear cover.
Note:
it is
not
necessary to remove the stand while removing
the rear cover.
1.
Remove all screws of the rear cover.
2.
Lift the rear cover from the TV. Make sure that wires and
flat coils are not damaged while lifting the rear cover from
the set.
4.4.2
Speakers
Each speakerbox unit is mounted with two screws.
When defective, replace the whole unit.