Operation
83
English
Encrypted Access
XX
Note:
This function is only relevant to you if you own a smart card for receiving
encrypted channels.
To display the
Encrypted Access
menu:
1.
Press
OPTIONS
and select
Device menu
and press
OK
.
2.
Press the
or arrow to select
Encrypted Access
and press
OK
to confirm.
3.
Menu items
Common Interface
and
CI Expert Settings
let you make the appro-
priate settings.
Please note:
The actual functions controlled by the above menu items depend on your smart
card and CI module. The receiver has no influence on these menus, it only pro-
vides them to the user.
For further information please study the documents normally included in the CI
module and smart card packages.
Troubleshooting
Attention!
Safety first - Never repair defective or apparently defective units yourself.
You may encounter problems in every electronic appliance. However, these
problems need not be caused by a defect. Instead, they are often caused by bad
leads or plug-and-socket joints or by connections being incorrectly established.
Check the following points before contacting technical support.
Problem
Possible cause
To do
Appliance won't start
No mains voltage
Check connector cable and
pluggable power supply
No picture, no sound
No mains voltage
Check the cable and power
supply connector
No or incorrect channel list
Perform automatic channel
scan
Connection lost
Check connection
GB SAT HDTV Philips.book Page 83 Wednesday, July 1, 2009 7:49 AM
