Tip: Write down the hair length settings you selected to create a certain
hairstyle as a reminder for future clipping sessions.
4
Switch on the appliance (Fig. 11).
5
Move the appliance slowly and against the direction of hair growth.
Press lightly.
Note: Since hair grows in different directions, you need to move the appliance in
different directions as well (upward, downward or across) (Fig. 20).
6
Always make sure that the flat part of the comb is
in full
contact with
the scalp to obtain an even result (Fig. 21).
Make overlapping passes over the head to ensure that you cut all the hair
that needs to be cut.
hair clipping without hair clipping comb
You can use the trimmer without comb to clip hair very close to the skin,
i.e. to a length of 1mm or to create contours.
Caution: Be careful when you clip without the comb because the trimmer
removes every hair it comes in contact with.
1
Press the setting selector (1) and slide the comb upwards (2). Then
pull the comb off the appliance () (Fig. 22).
2
Before you start to contour the hairline around the ears, comb the
hair ends over the ears.
Tilt the appliance in such a way that only one edge of the trimmer
touches the hair (Fig. 2).
Only cut the hair ends. The hairline should be close to the ear.
4
To contour the neckline and sideburns, turn the appliance and make
downward strokes (Fig. 24).
5
Move the appliance slowly and smoothly. Follow the natural hairline.
Beard trimming
When you trim your beard for the first time, be careful. Do not move the
trimmer too fast. Make smooth and gentle movements.
EnGlish