Put the adapter in the wall socket (Fig. 5).
4
Put the appliance in the charger (Fig. 6).
The charging light starts to flash green to indicate that the appliance
is charging (Fig. 7).
When the battery is fully charged, the charging light lights up
green continuously.
After approx. 0 minutes, the charging light goes out to save energy.
Note: You can also charge the appliance by plugging the adapter directly in to
the appliance.
Using the appliance
Body trimming
You are advised to trim your body hair when it is dry because wet hair
tends to stick to the body.
Tip: Take your time when you first start to trim sensitive areas. You have to
acquire practice with the appliance. Your skin also needs some time to adjust to
the procedure.
Tip: When you trim
sensitive areas, we advise you not
to use the trimmer
without the trimming comb.
1
Attach the trimmer onto the handle (‘click’). (Fig. 8)
2
Slide the body trimming comb into the guiding grooves on both sides
of the handle (‘click’) (Fig. 9).
To set the comb to the desired setting, press the setting selector (1)
and slide the comb to the desired hair length setting (2) (Fig. 10).
You can choose any setting between 3 and 11mm.
4
Switch on the appliance (Fig. 11).
5
To trim the hair, move the trimming comb through the hair
slowly (Fig. 12).
6
When you are finished, switch off the appliance.
(Fig.
13)
,
,
,
EnGlish