Body shaving
You can use the body shaver wet or dry to shave hair on all parts of the
body below the neckline. Do not use the body shaver to shave or trim facial
or scalp hair.
Note: Before you use the body shaver, always check it for damage or wear. If
the shaving foil unit of the body shaver is damaged or worn, do not use the
body shaver, as injury may occur. Replace a damaged shaving foil unit right
away (see chapter ‘Replacement’).
1
Attach the body shaver onto the handle (Fig. 14).
2
Switch on the appliance (Fig. 11).
Place the shaving foil unit on the skin. Always make sure that the
shaving foil unit is in full contact with the skin (Fig. 15).
4
Move the appliance slowly and against the direction of hair growth.
Press lightly (Fig. 16).
Tip: Stretch your skin with your free hand to make the hairs stand upright.
Tip: If the hairs are longer than 10mm, trim them first to make shaving easier.
hair clipping
Preparing for hair clipping
1
Make sure that the head of the person whose hair you intend to cut
is at the same level as your chest. This ensures that all parts of the
head are clearly visible and within easy reach.
2
Comb the hair in the growth direction (Fig. 17).
hair clipping with hair clipping comb
1
Attach the trimmer onto the handle (‘click’). (Fig. 8)
2
Slide the hair clipping comb into the guiding grooves on both sides of
the handle (‘click’) (Fig. 18).
To set the comb to the desired setting, press the setting selector (1)
and slide the comb to the desired hair length setting (2) (Fig. 19).
You can choose any setting between 3 and 19mm.
EnGlish