Connect to playback devices 15
VGA
2 On your computer, adjust the screen
resolution of the computer to the correct
setting and switch the VGA signal to an
external monitor. The following resolutions
are supported:
Resolution
Image refresh
rate
VGA
640 x 480
60 Hz
SVGA
800 x 600
60 Hz
XGA
1024 x 768
60 Hz
WXGA
1280 x 768
60 Hz
HD
1280 x 720
60 Hz
FULL HD
1920 x 1080
60 Hz
3 Press
to display the input source list,
and then select
VGA
.
Connecting to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1
Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5 mm jack, or red and white
jacks) on the external speakers. Or connect
the connector on the projector to
headphones.
•
The speakers of the projector are
deactivated automatically when the
external speakers or headphones are
connected to the projector.
MICRO SD
AV
HDMI 1
HDMI 2
USB
DC
2 When connecting to the headphones, use
the volume control on the remote control to
adjust the volume to a comfortable level.
