Philips MGD203, Руководство пользователя

Страница: 7 / 36

ENGLISH 4
The monitor will automatically sychronise within a wide range of scanning frequencies and
determine the specific operating mode.
Monitor behaviour (degauss & reset), image quality and screen geometry adjustments can
be changed or selected via the hardware OSD by means of the front panel push-buttons.
Your new monitor provides special features as:
´ Very high contrast, high definition image.
´
Digital brightness uniformity control (higher than 90%).
´
Automatic correction of the effect of the horizontal magnetic field.
´
Digital correction of geometric distortions.
´
Automatic calibration (with optional light probe and software tool).
´
Incredible high contrast (750 cd/sqm for 21” - 900 cd/sqm for the 17”).
´
Universal power supply.
´ Interactive On Screen Display with a rich set of functions for easy installation and cus-
tomization.
´ Fully autoscan from 30 to 95 KHz (Horizontal Frequency)
50 to 170 Hz (Vertical Frequency).
´ Most common video modes already factory stored in the monitor memory.
´ Large number of free memory locations to store up to 16 user-defined video modes.
´ Full compatibily with all mono and color video cards, progressive and interlaced timing
´ Black Level Stabilization for quick warm-up (4 min.) and perfect contrast stability over
time.
´ Integrated Ambient Light Compensation control function.
´ RS 485 - like ’Daisy chain’ bus connection (up to 15 monitors), allows simultaneous
adjustment of each enabled monitor from each monitor’s keyboard.
´ RS 232 serial connection to host computer or service laptop.
´
Large number of functions available through the interactive On Screen
Display, (including also Hours of Operating, Horizontal Scan Rate,
Vertical Refresh Rate) to allow easy installation and optimal operation.
´
Orbiting function to increase CRT lifetime.
´
Loop-through input facility makes the connection of more monitors to the same video
source easy and economical.
´
Flexible inputs selection: 3 BNCs (for mono drivers), 5 BNCs or 15 pin D-sub (for color
drivers).
´
Six user selectable combinations of max Brightness and max Contrast
(5 1 available to the user).
´
Direct key access for most commonly used user commands:
BRIGHTNESS up/down, CONTRAST up/down, REF. SETTING,
USER SETTING, USER STORE, KEYBOARD UNLOCK.
´
Automatic Brightess Control programmable.
´
Multi-level Keyboard lock facility.
´
Number of hours of operation recorded and readable at any time.
´
Power Saving (
VESA DPMS
) function according to latest Environmental
Regulations & Reccomendations, including also the Power Factor (
IEC 555-2
) control cir-
cuit.