Philips MCDB710, Руководство пользователя

Страница: 29 / 35

29
English
Other Functions
Setting the clock
1
In Standby mode, press and hold
CLOCK
on
the remote control until the time flashes on the
display.
➜
”
CLOCK SET
” is displayed briefly. Then, the
hour digits flash on the display screen.
2
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
hours.
3
Press
CLOCK
to confirm.
➜
The minute digits flash on the display screen.
4
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
minutes.
5
Press
CLOCK
again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode
, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1
In power-on mode, press
SLEEP/TIMER
on
the remote repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
Sleep Off
➜
Sleep 10
➜
Sleep 20
➜
Sleep 30
➜
Sleep 40
➜
Sleep 50
➜
Sleep 60
➜
Sleep 70
➜
Sleep 80
➜
Sleep 90
➜
Sleep Off
2
When you reach the desired length of time, stop
pressing
SLEEP/TIMER
.
To deactivate the sleep timer
●
Press
SLEEP/TIMER
repeatedly until “Sleep
Off ” is displayed, or press
ECO POWER/
STANDBY-ON
y .
In standby mode, the timer setting enables the
system to switch on automatically at a set time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1
Press and hold
SLEEP/TIMER
until the time
flashes on the display.
➜
“Timer Set” scrolls. Then, the hour digits flash
on the display screen.
2
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
hours.
3
Press
SLEEP/TIMER
to confirm.
➜
The minute digits flash on the display screen.
4
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
minutes.
5
Press
SLEEP/TIMER
to confirm the time
setting.
➜
“Timer Set Off ” appears on the display
screen.
6
Turn
VOLUME -/+
clockwise or anticlockwise
or press
VOL +/-
on the remote to select
“Timer Set On”.
➜
icon appears on the display screen.
To deactivate the timer
●
Select “Timer Set Off ” at Step 6.
pg 020-034_MCDB710_12_Eng 2008.5.23, 10:06 29