16
EN
4 Get
started
Caution
Use of controls or adjustments or performance of
•
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from heat,
•
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased battery life! Never mix different
•
brands or types of batteries.
Risk of product damage! When the remote control is
•
not used for long periods, remove the batteries.
1
Open the battery compartment.
2
Insert 2 R03 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
b
c
a
Set clock
1
In standby mode, press and hold
RDS/
CLOCK
to activate the clock setting
mode.
The hour digits are displayed and begin
»
to blink.
2
Turn
/-
to set the hour.
3
Press
RDS/CLOCK
to confi rm.
The minute digits are displayed and
»
begin to blink.
4
Turn
/-
to set the minute.
5
Press
RDS/CLOCK
to confi rm.
Activate demonstration mode
You can see an overview of all features.
1
In standby mode, press on the main
unit to activate the demonstration mode.
A demonstration of major available
»
features starts.
To deactivate the demonstration mode:
1
Press
on the main unit again.
Adjust brightness of display
panel
1
In standby mode, press
DIM
repeatedly
to select different levels of brightness for
the display panel.
Turn on
1
Press
.
It takes 10 seconds to heat up before
»
the apparatus turns on.
