37
Reduce the distance between the remote
•
control and the unit.
Insert the battery with its polarities
•
(+/– signs) aligned as indicated.
Replace the battery.
•
Aim the remote control directly at the
•
sensor on the front of the unit.
No disc detected
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
•
the lens has cleared.
Replace or clean the disc.
•
Use a fi nalized CD or correct format disc.
•
No picture
Check the video connection.
•
Turn on the TV to the correct Video-In
•
channel.
Progressive scan is activated but the TV
•
does not support progressive scan.
Black and white or distorted picture
The disc does not match the TV color
•
system standard (PAL/NTSC).
Sometimes a slight picture distortion may
•
appear. This is not a malfunction.
Clean the disc.
•
A distorted picture may appear during
•
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
The aspect ratio if fi xed on the loaded
•
DVD disc.
The aspect ratio may not be changed for
•
some TV systems.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or
•
subtitles in multiple languages.
The audio or subtitle language setting is
•
prohibited on the disc.
Cannot display some fi les in USB device
The number of folders or fi les in the USB
•
device has exceeded a certain limit. This
phenomenon is not a malfunction.
11 Troubleshooting
Warning
Never remove the casing of this apparatus.
•
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome. When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power
Ensure that the AC power plug of the
•
unit is connected properly.
Ensure that there is power at the AC
•
outlet.
As a power-saving feature, the unit
•
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No sound or poor sound
Adjust the volume.
•
Disconnect the headphones.
•
Check that the speakers are connected
•
correctly.
Check if the stripped speaker wires are
•
clamped.
Left and right sound outputs reversed
Check the speaker connections and
•
location.
No response from the apparatus
Disconnect and reconnect the AC power
•
plug, then turn on the system again.
As a power-saving feature, the system
•
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
Remote control does not work
Before you press any function button,
•
fi rst select the correct source with the
remote control instead of the main unit.
English
EN
