17
Set clock
1
In the standby mode, press
CLOCK
to
activate the clock setting mode.
The time digits are displayed and begin
»
to blink.
If the time digits are not displayed,
»
press and hold
for more than 2
seconds to switch to standby mode,
then repeat step 1.
2
Press
/ to set the hour.
3
Press
/
to set the minute.
4
Press and hold
CLOCK
to select 12-hour
or 24-hour format.
5
Press
CLOCK
to confi rm.
Turn on
1
Press
.
The unit switches to the last selected
»
source.
Switch to standby
1
Press and hold for more than 2
seconds to switch the unit to standby
mode.
The clock (if set) appears on the
»
display panel.
To switch the unit to Eco Power Standby
mode:
1
During play, press .
The backlight on the display panel
»
turns off.
Select the correct source on
TV
1
Turn on the apparatus.
2
Press
DISC
to select the disc source.
4 Get
started
Caution
Use of controls or adjustments or
•
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from
•
heat, sunshine or fi re. Never discard batteries
in fi re.
Risk of decreased battery life! Never mix
•
different brands or types of batteries.
Risk of product damage! When the remote
•
control is not used for long periods, remove
the batteries.
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
English
EN
