Philips MCB27, Руководство пользователя

Страница: 22 / 30

22
English
Tuner
Tuning to radio stations
1
Press SOURCE once or more to select FM
(or FM on the remote control) .
2
Press and hold
4
/
¢
(or
5
/
6
on the
remote control) until
SEARCH
appears
➜
The radio automatically tunes to a station
with sufficient reception. Display shows
SEARCH
during automatic tuning.
3
Repeat step
2
if necessary until you find the
desired station.
●
To tune to a weak station, press
4
/
¢
(or
5
/
6
on the remote control) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory, manually or
automatically (Autostore).
Autostore: Automatic programming
Automatic programming will star t from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press the
ALBUM//-
(or
¡
/
™
on
the remote control) buttons once or more to
select the preset number where programming
should start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold SCAN/PROGRAM (or
PROG on the remote control) until
AUTO
appears.
➜
Available stations are programmed: RDS
stations followed by FM stations (See RDS ).
➜
After all stations are stored, the last preset
station will then be played.
Manual programming
1
Tune to your desired station (see Tuning to
radio stations
).
2
Press
SCAN/PROGRAM
(or
PROG
on the
remote control) to activate programming.
3
Press
ALBUM//-
(or
¡
/
™
on the
remote control) to allocate a number from 1 to
20 to this station.
4
Press
SCAN/PROGRAM
(or
PROG
on the
remote control) to confirm.
➜
Display shows the preset number, waveband
and the frequency of the preset station.
5
Repeat steps 1-4 to store other stations.
●
You can erase a preset station by storing
another frequency in its place.
To listen to a preset station
●
Press the
ALBUM//-
(or
¡
/
™
on
the remote control) buttons once or more until
the desired preset station is displayed.
●
You can also use the Numerical Keypad
(0~9)
to input a number directly and tune to
the station associated with this number.
●
To input a number larger than 10, press
SHIFT
once or more to select the first digit you want
and then use the
Numerical Keypad (0~9)
to input the second digit.
P001-P030_MCB275_05_Eng 2007.6.13, 10:28 22