Philips MC-20, Руководство пользователя

Страница: 20 / 21

20
English
3140 115 27782
Specifications
AMPLIFIER
Output power ....................................... 2 x 10 W RMS
............................................................ 20 W + 20 W MPO
Signal-to-noise ratio ..........................
≥
65 dBA (IEC)
Frequency response ......... 40 – 20000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 8
Ω
Impedance headphones .................... 32
Ω
-1000
Ω
CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio ............................................ 75 dBA
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range ................................ 531 – 1602 kHz
LW wave range ..................................... 153 – 279 kHz
Sensitivity at 75
Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity .................................................................
≥
28 dB
Total harmonic distortion .....................................
≤
5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ......................................
≥
50 dBA
TAPE DECK
Frequency response
Normal tape (type I) ...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) .................................... 50 dBA
Wow and flutter .........................................
≤
0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) ... 155 x 220 x 256 (mm)
GENERAL INFORMATION
AC Power ................................................... 230 V / 50 Hz
Dimensions (w x h x d) ... 140 x 223 x 264(mm)
Weight (with/without speakers) ..................................
............................................................... approx. 7.5 / 3.0 kg
Standby power consumption .......................... < 3 W
Subject to modification
Troubleshooting
WARNING
Do not open the system as there is a risk of electric shock! Under no circumstances
should you try to repair the system yourself, as this will invalidate the warranty
¶
If a fault occurs, first check the points listed below before taking the system for repair.
¶
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
Symptom Remedy
CD PLAYER OPERATION
“
NO DISC
” is displayed.
¶
Check if the disc is inserted upside down.
¶
Wait until the moisture condensation at the lens
has cleared.
¶
Use a finalised CD-R(W).
¶
Replace or clean the disc, see Maintenance.
pg 001-021/MC20/22-Eng 12/7/00, 1:31 PM 20