Philips MC-20, Руководство пользователя

Страница: 16 / 21

16
English
3140 115 27782
Tape Recorder
TIMER
ON • OFF
PROGRAM
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE
REPEAT
DBB DSC
PRESET STOP PLAY•PAUSE
iR SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
SELECT
SOURCE
PROGRAM
TIMER
TUNING TUNING RECORD
REV MODE
BAND
SIDE A/B
PREV NEXT
SIDE A
SIDE B
TIMER
ON • OFF
RDS
Tape playback
1
Select TAPE source.
➜
The display shows
TAPE
briefly. The tape
counter
TAPE 000
display with the
SIDE A
or
SIDE B
and reverse mode status are then shown
during tape mode.
2
Press OPEN to open the tape door.
3
Insert a recorded tape and close the tape door.
¶
Load the tape with the open side downward and
the full spool to the left.
4
Press PLAY•PAUSE
2;
(on the remote
control
2
) to start playback.
5
By pressing
à
or
á
on the remote control, fast
winding of tape is possible in both directions.
¶
To review and cue at low volume, press
¡1
or
2™
on the system.
¶
During fast winding or review/cue you can
monitor the tape message with the tape counter.
Release the fast wind/cue control at your desired
passage.
6
To stop the tape, press STOP
9
on the system
or remote control.
¶
To reset the tape counter, press STOP
9
again.
Note:
– The sound source cannot be changed while
recording a tape.
Switching tape sides
The tape side can be switched manually or
automatically before or during tape playback.
¶
Press SIDE A/B ( SIDE /
;
or during playback
only
2
on the remote control).
➜
The display shows
SIDE A
or
SIDE B
and the
tape counter resets to
000
.
Reverse mode options
¶
Press REV MODE once or more to select your
option;
å
: playback stops at the end of the tape.
∂
: both sides are played once.
∫
: both sides are played repeatedly, up
to 5 times each side.
General Information on
Recording
¶
Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
¶
For recording, use only NORMAL (IEC type I)
cassette on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type cassettes.
¶
The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND, DBB or INTERACTIVE SOUND
controls will not affect the recording in progress.
¶
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
¶
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
pg 001-021/MC20/22-Eng 12/7/00, 1:31 PM 16