9
EN
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press .
The main menu will appear.
3.
3.
Use
to select 'TUNER SET UP'.
Then press
.
4.
4.
Use
to select 'MANUAL TUNING'.
Then press
.
5.
5.
Select 'PROG.' with
. Then press
.
6.
6.
With
or
, select the desired
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press
.
7.
7.
Select 'CHANNEL' with
, and con-
firm with
. Then enter the desired chan-
nel with
.
If you set 'SKIP' on for a channel, this channel
will be ignored when going through the channels
with or .
8.
8.
Save the TV channel with
.
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10.
To end, press
.
Using the satellite receiver
Satellite channels from a satellite receiver (con-
nected to the scart socket AV2(DECODER) ) are
received on the video recorder on programme
number 'AV2' with 0.0.2.
You should select the satelite channels to be
received by the satellite receiver directly on the
receiver itself.
STATUS/EXIT
B 1
P–
P+
0..9
B 1
L C
K B
B 1
0..9
L C
K B
B 1
L C
K B
B 1
L C
K B
B 1
L C
K B
MENU
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to
each TV station.
Certain frequency ranges are specified as spe-
cial channels (hyperband channels).
I don't know the channels for my TV stations
In this case, press
in 'CHANNEL' to
start the automatic channel search. A changing
channel number will appear on the TV screen.
Continue the automatic search until you have
found the desired TV channel.
L C
K B
MANUAL TUNING
→
PROG.
P55
CHANNEL
055
DECODER
[OFF]
SKIP
[OFF]
SELECT
K L
CHOOSE
B
END=EXIT
VR630/07 02.2.6 10:13 AM Page 9
