Problem
Solution
No sound
– Disconnect the headphones.
– Switch on the selected source or select another source.
No picture, only sound is available
– Set the TV to the correct video channel for the selected source.
In a Scart chain: Problems seeing/hearing
– Switch any other equipment in the Scart chain to standby.
the correct video source
If that does not help, also switch the equipment you want to see/hear to
standby. Next, switch it on again.
Poor quality of playback: distorted
– Make sure the TV set is properly adjusted.
picture and/or sound
– Make sure the disc is not dirty. Clean the disc.
– Sometimes the picture may be temporarily distorted.This is not a defect of
your DVD recorder system.
The picture is distorted or
– The TV system of the inserted disc does not match the TV system of your TV
black-and-white during playback
(PAL/NTSC).
– Select
RGB + CVBS
in the the system menu. See
t
Picture
➜
Video
output
on page 47.
Picture and/or sound interference
– Check your aerial.
on TV reception
– Change the TV system (see “TV system” on page 52)
No bass sound
– Connect the supplied subwoofer.
No sound on one of the speakers
– Check if the speaker is connected properly.
– Check if the speaker cable is damaged.
No sound on the centre
– Press SURR repeatedly to select another surround effect.
and/or rear speakers
– Make sure you have connected all speakers.
– Make sure you have selected
Yes
for
Centre connected
and
Rear
connected
in the menu
Installation
➜
Audio setup
➜
Speaker setup
.
See “Speaker setup” on page 55.
No digital surround sound
– Check if the inserted disc or the selected appliance supports digital
(Dolby Digital, DTS) available
surround sound.
– Check if the selected external equipment is connected to IN DIGITAL or
IN OPTICAL on the DVD recorder system.
No digital sound from equipment
– Switch the digital output of the connected equipment to PCM.
connected to IN DIGITAL or
IN OPTICAL
No sound signal at the digital output
– Check if the setting for the digital output is correct. See “Digital output
setting” on page 55.
Distorted picture (“artifacts”)
– Switch the DVD recorder system from
Progressive Scan
to
Interlaced
when playing a copyprotected DVD and
(see “
Component video output
” on page 47) or
using Progressive Scan
use the Scart connection.
Troubleshooting
61
English
