Philips LC4.6U, Руководство по обслуживанию

Страница: 7 / 84

7 LC4.6U 6 LC4.6U 7 LC4.6U 6 LC4.6U
4. INSTRUÇÕES MECÂNICAS
Índice deste capítulo:
1. Posicão dos Cabos
2. Posições de Serviço
3. Remoção dos Paineis
4. Remontagem
4.1 Posição dos cabos
4.2 Posições de Serviço
Para facilitar a manutenção do aparelho, seguem algu-
mas possibilidades:
• Os calços da embalagem.
• Barras de Espuma.
• Suportes de Alumínio.
4.2.1 Barras de Espuma
Figura 4-2 Barras de Espuma
As barras de espuma podem ser usadas por todos os tipos
e tamanhos de TVs Flat. Coloque o plasma ou TV LCD nas
barras de espuma (protetor ESD), em uma posição estável para
fazer o alinhamento. Com um espelho embaixo do TV, você pode
facilmente monitorar a tela.
Nota :
• As figuras abaixo podem diferir da situação real, devido
às diferentes configurações do TV.
• Siga as instruções de desmontagem na ordem descrita.
4.3 Suporte de Alumínio
Figura 4-3 Suporte de Alumínio
O suporte de alumínio pode ser montado com a tampa traseira
ou esquerda removída ou não. Assim, o suporte pode ser
usado para armazernar produtos ou para fazer medições.
Será muito apropriado para fazer testes de duração quando
não se tem muito espaço, sem o risco de super aquecimento
ou risco de quedas. O suporte pode ser montado e removido
facilmente usando parafusos que podem ser apertados ou
soltos manualmente sem o uso de ferramentas. Veja a figura
acima.
Nota: Somente usar os parafusos para montar o monitor no
suporte.
Figura 4-1 Posição dos cabos
Mechanical Instructions
EN 6 LC4.6U AA 4.
4.
Mechanical Instructions
Index of this chapter:
1.
Cable Dressing
2. Service Positions
3.
Assy/Panel Removal
4.
Re-assembly
Notes:
• Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassemble instructions in described order.
4.1
Cable Dressing
Figure 4-1 Cable dressing
4.2
Service Positions
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging (see figure "Rear cover").
•
Foam bars (created for service).
•
Aluminium service stands (created for Service).
4.2.1
Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
face down on the (ESD protective) foam bars, a stable situation
is created to perform measurements and alignments.
By placing a mirror under the TV, you can monitor the screen.
4.2.2 Aluminium Stands
Figure 4-3 Aluminium stands (drawing of MkI)
The aluminium stands (order code 3122 785 90480) can be
mounted with the back cover removed or still left on. So, the
stand can be used to store products or to do measurements. It
is also very suitable to perform duration tests without taking
much space, without having the risk of overheating, or the risk
of products falling. The stands can be mounted and removed
quick and easy with use of the delivered screws that can be
tightened and loosened manually without the use of tools. See
figure above.
Note:
Only use the delivered screws to mount the monitor to
the stands.
E_14710_011.eps
020804
E_06532_018.eps
170504
E_06532_019.eps
170504
Mechanical Instructions
EN 6 LC4.6U AA 4.
4.
Mechanical Instructions
Index of this chapter:
1.
Cable Dressing
2.
Service Positions
3. Assy/Panel Removal
4.
Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassemble instructions in described order.
4.1
Cable Dressing
Figure 4-1 Cable dressing
4.2
Service Positions
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging (see figure "Rear cover").
•
Foam bars (created for service).
•
Aluminium service stands (created for Service).
4.2.1
Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
face down on the (ESD protective) foam bars, a stable situation
is created to perform measurements and alignments.
By placing a mirror under the TV, you can monitor the screen.
4.2.2 Aluminium Stands
Figure 4-3 Aluminium stands (drawing of MkI)
The aluminium stands (order code 3122 785 90480) can be
mounted with the back cover removed or still left on. So, the
stand can be used to store products or to do measurements. It
is also very suitable to perform duration tests without taking
much space, without having the risk of overheating, or the risk
of products falling. The stands can be mounted and removed
quick and easy with use of the delivered screws that can be
tightened and loosened manually without the use of tools. See
figure above.
Note:
Only use the delivered screws to mount the monitor to
the stands.
E_14710_011.eps
020804
E_06532_018.eps
170504
E_06532_019.eps
170504
Mechanical Instructions
EN 6 LC4.6U AA 4.
4. Mechanical Instructions
Index of this chapter:
1.
Cable Dressing
2.
Service Positions
3. Assy/Panel Removal
4. Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
• Follow the disassemble instructions in described order.
4.1
Cable Dressing
Figure 4-1 Cable dressing
4.2 Service Positions
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging (see figure "Rear cover").
•
Foam bars (created for service).
•
Aluminium service stands (created for Service).
4.2.1
Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
face down on the (ESD protective) foam bars, a stable situation
is created to perform measurements and alignments.
By placing a mirror under the TV, you can monitor the screen.
4.2.2 Aluminium Stands
Figure 4-3 Aluminium stands (drawing of MkI)
The aluminium stands (order code 3122 785 90480) can be
mounted with the back cover removed or still left on. So, the
stand can be used to store products or to do measurements. It
is also very suitable to perform duration tests without taking
much space, without having the risk of overheating, or the risk
of products falling. The stands can be mounted and removed
quick and easy with use of the delivered screws that can be
tightened and loosened manually without the use of tools. See
figure above.
Note:
Only use the delivered screws to mount the monitor to
the stands.
E_14710_011.eps
020804
E_06532_018.eps
170504
E_06532_019.eps
170504