LFF6080
- 34 -
6 - Parameters/Setup
Economy period
This function allows you to defer a fax transmission to "off-
peak hours" and thus reduce the cost of your
communications.
The
economy period
, via the telephone network (at off-
peak hours), is preset by default from 7.00 pm to 7.30 am.
Nevertheless you may change this time slot.
To modify the economy period:
233 - SETUP / SEND / ECO PER.
1
Press , enter
233
using the keypad.
2
Enter the hours of the new economy period (for
example 19:00-07:30) and confirm your choice
with
OK
.
3
To exit this menu, press
.
To use the economy period:
32 - FAX / ECO TRANS.
1
Select
32 - FAX / ECO TRANS
.
2
Enter the call number and confirm with
OK
.
3
Adjust the contrast and confirm with
OK
.
4
Select the feed type,
FEEDER
or
MEMORY
and
confirm with
OK
.
5
You may enter the number of pages before
transmission and confirm with
OK
.
6
If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select
NEXT
and confirm with
OK
. Select
DONE
when all pages have been scanned.
Reception Mode
This function enables you, if you have an external device
(telephone, answering machine) plugged in to the EXT
socket on your terminal, or to the telephone plug adapter,
to select the device receiving faxes and/or voice
messages.
You may choose between the following reception modes :
•
MANUAL
: the terminal does not receive any
documents automatically. When you answer your
telephone and realise that you are receiving a fax, you
should press the
button on the terminal to receive
the fax.
•
FAX
: the Fax reception mode is launched on the
terminal systematically.
•
FAX-ANSWER.
: the terminal handles reception of fax
messages automatically, the external device handles
reception of telephone communications automatically.
Press the #0 buttons on your telephone to cancel fax
detection.
To set the reception mode:
241 - SETUP / RECEPTION / MODE
1
Press , enter
241
using the keypad.
2
Select the required option and confirm with
OK
.
3
To exit this menu, press
.
Reception without paper
Your fax offers you the possibility to either accept or
refuse document reception if your printer is unavailable
(no paper...).
If your fax printer is unavailable, you may choose between
two modes of reception:
• reception mode
WITHOUT PAPER
, your fax saves
the incoming messages in the memory,
• reception mode
WITH PAPER
, your fax refuses all
incoming subscribers.
To select the reception mode:
242 - SETUP / RECEPTION / REC. PAPER
1
Press , enter
242
using the keypad.
2
Select the option
WITH PAPER
or
WITHOUT
PAPER
and confirm your choice with
OK
.
3
To exit this menu, press
.
Number of copies
You may print incoming documents more than once (1 to
99).
To set the number of each document received:
243 - SETUP / RECEPTION / NBR OF COPIES
1
Press , enter
243
using the keypad.
2
Enter the wanted number of copies and confirm
with
OK
.
3
To exit this menu, press
.
At each document reception, your fax will print the
number of copies requested.
Important
If you have connected a telephone to
the EXT socket on your terminal or
to a telephone plug adaptor, we
recommend that you set the
reception mode to
MANUAL
.
When you receive a call, you pick up
using this telephone and you hear
the particular fax tone. You can:
- press the
button on your
terminal or buttons #7 on your
telephone to receive the fax.
Important
Paper out is indicated by a beep and
a message on the screen.
Received faxes are then stored in
memory (icon
flashing) to be
printed as soon as you add paper
into the feeder.
Downloaded From ManualsPrinter.com Manuals
