Philips HTB2510, Руководство пользователя

Страница: 22 / 34

20
EN
Energy saving settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Screen saver] : Switch the home
theater to screen saver mode after 10
minutes of inactivity.
•
[Auto standby]
: Switch the home
theater to standby after 18 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
•
[Sleep timer]
: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
Speaker settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Advanced]
, and then press
OK
.
4
Press the Navigation buttons and OK to
select and change:
• [Enhanced audio] : Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select
[Off]
.
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
17).
Restore default settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select [Advanced] > [Restore default
settings] , and then press OK .
4
Select
[OK]
, and then press
OK
to
confirm.
» Your home theater is reset to its
default settings except for some
settings such as parental control and
DivX VOD registration code.