Philips HQ903, Руководство пользователя

Страница: 13 / 18

21 22
Note: Do not clean more than one cutter and guard at a time,
since they are all matching sets. If you accidentally mix up the
cutters and guards, it may take several weeks before optimal
shaving performance is restored.
5 Remove the cutter from the guard (Fig. 16).
6
Clean the cutter with the short-bristled side of
the brush. Brush carefully in the direction of the
arrows (Fig. 17).
7 Clean the guard with the brush (Fig. 18).
8
Put the shaving heads back into the shaving unit.
9 Put the retaining frame back into the shaving unit and
turn the orange wheel clockwise.
10
Put the shaving unit back onto the shaver.
storage
Put the protection cap on the shaver after use to -
prevent damage to the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap covers the
release button.
Replacement
Replace the shaving heads every two years for optimal
shaving results.
Replace damaged or worn shaving heads with Philips HQ55
shaving heads.
For instructions on how to remove the shaving heads,
see section ‘Every two months: shaving heads’ in chapter
‘Cleaning and maintenance’.
Environment
Do not throw away the appliance with the normal -
household waste at the end of its life, but hand it in at
an official collection point for recycling. By doing this,
you help to preserve the environment (Fig. 19).
Batteries contain substances that may pollute the
-
environment. Do not throw away empty batteries with
the normal household waste, but dispose of them at
an official collection point for batteries. Always remove
the batteries before you discard and hand in the
appliance at an official collection point (Fig. 20).
EnglisH EnglisH