Philips HQ903, Руководство пользователя

Страница: 12 / 18

19 20
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
appliance.
Be careful with hot water. Always check if the water is not
too hot, to avoid burning your hands.
Regular cleaning guarantees better shaving performance.
The easiest and most hygienic way to clean the appliance
is to rinse the shaving unit and the hair chamber with hot
water every time you have used the appliance.
After every use: shaving unit and hair chamber
Never rinse the shaver when the battery compartment is
open. Always make sure the battery compartment cover
is properly attached before you start rinsing the shaver.
1
Switch off the shaver.
2 Rinse the outside of the shaving unit under a hot tap
for some time (Fig. 9).
3
Press the release button (1) and pull the shaving
unit in a straight upward movement off the shaver
(2) (Fig. 10).
4 Rinse the inside of the shaving unit under a hot tap
for some time (Fig. 11).
5
Rinse the hair chamber under a hot tap for some
time (Fig. 12).
6 Put the shaving unit back onto the shaver (Fig. 13).
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean the
shaving heads. Only use HQ110 Shaving Head Cleaning Spray.
1 Switch off the shaver.
2
Press the release button (1) and pull the
shaving
unit off the shaver (2) (Fig. 10).
3 Turn the orange wheel anticlockwise (1) and remove
the retaining frame (2) (Fig. 14).
4
Remove the shaving heads from the shaving unit one
by one (Fig. 15).
EnglisH EnglisH