2
Let the shaver run until it stops, undo the two
screws in the hair chamber and remove it.
3
Undo the two screws at the back of the shaver
and remove the back panel of the housing.
4
Remove the side panels by pulling them off the
sealed power unit.
5
Undo the three screws in the sealed power
unit.
Remove the back panel of the sealed power
unit by means of a screwdriver.
7
Remove the battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after
the battery has been removed.
EnglisH
12
Содержание HQ7240/16
Страница 75: ...如果電鬍刀組與電鬍刀分開 您只需要將鉸 鏈插回鬍渣室邊緣的槽孔中 並將其推回 原位 會聽見 喀噠 一聲 即可輕易地裝 回 繁體中文 77 ...
Страница 86: ...88 如果剃须刀头部件从剃须刀上脱落 可很容 易地装回 方法是将铰链插入胡茬储藏室边 的槽中 将其推到位 直到锁定到位 可听 到咔嗒声 简体中文 200 03 13 ...
Страница 87: ...89 ...
Страница 88: ...90 4222 002 5020 2 ...