Philips HP L2035, Руководство по обслуживанию

Страница: 4 / 77

Technical Data(Continued)
4
Go to cover page
HP L2035
R ecognizin g Pr es et Dis pl ay R esolu tions
The display resolutions listed below are the most commonly used
modes and are set as factory defaults. This monitor automatically
recognizes these preset modes and they will appear properly sized
and centered on the screen.
Factor y Pr es et Dis pl ay Mod es
Pr es et P i x el For mat
Ho rz Fr eq
(kHz) V er t Fr eq (Hz)
1 640 x 4 80 31.5 60.0
2 6 40 x 480 37.5 75.0
3 6 40 x 480 43.3 85.0
4 720 x 4 00 31.5 70.1
5 800 x 600 37.9 60.3
6 800 x 600 53.7 85.1
7 8 32 x 624 49.7 75.0
8 1024 x 7 68 48.4 60.0
9 1024 x 7 68 60.0 75.0
10 1024 x 768 68.7 85.0
11 1152 x 870 69.0 75.1
12 1152 x 900 61.8 66.0
(Sun Mode II)
13 1280 x 9 60 60.0 60.0
14 1280 x 1024 64.0 60.0
15 1280 x 1024 80.0 75.0
16 1280 x 1024 91.2 85.0
17 1600 x 1200 75.0 60.0
18 1600 x 1200 93.8 75.0
En terinG Us er Mod es
The video controller signal may occasionally call for a mode that
is not preset if:
You are not using a Hewlett Packard standard graphics
adapter.
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 18
factory preset modes, there are four user modes that can be
entered and stored.
Usin g t h e Ener gy S av er Featur e
When the monitor is in its normal operating mode, the monitor
uses less than 75 watts of power and the Power light is green.
The monitor also supports a reduced power state. The reduced
power state will be entered into if the monitor detects the absence
of either the horizontal sync signal and/or the vertical sync signal.
Upon detecting the absence of these signals, the monitor screen is
blanked, the backlight is turned off, and the Power light is turned
amber. When the monitor is in the reduced power state, the
monitor will utilize less than 3 watts of power. There is a brief
warm up period before the monitor will return to its normal
operating mode.
Refer to your computer manual for instructions on setting energy
saver features (sometimes called power management features).
By selecting settings in the monitor s Energy Saver utility, you
can also program the monitor to enter into the reduced power
state at a predetermined time. When the monitor s Energy Saver
utility causes the monitor to enter the reduced power state, the
Power light blinks amber.