Philips HD7753, Руководство пользователя

Страница: 7 / 164

7
5 Using the appliance
5.1 Filling the water reservoir
1
Open the water reservoir lid and fill the
water reservoir with the required amount
of cold water. (Fig. 6)
There are indications for 4 to 10 cups (550ml
to 1375ml) on the water level window. You can
use these indications to determine how much
water to put in the water reservoir. Keep in
mind that the amount of brewed coffee will be
slightly less, since ground coffee absorbs water.
D
Note: (Fig. 11)
Do not fill the water reservoir beyond the
10-cup indication, otherwise water spills from
the opening at the back.
5.2 Using coffee beans
B
Warning:
Do not put espresso coffee beans in the coffee
bean container. Only use regular coffee beans.
B
Warning:
Always keep the water reservoir lid closed when
you fill the coffee bean container with coffee
beans. Otherwise coffee beans can fall into the
water reservoir and block up the water inlet.
1
Press the OPEN button on the right-hand
side of the coffeemaker to open the filter
basket holder. (Fig. 12)
2
Place a paper filter (no. 4) or the
permanent filter in the filter basket to collect
the ground coffee. (Fig. 13)
3
Close the filter basket holder.
4
Turn the lid of the thermos jug by its lever to
‘closed/brewing’ position. In this position the
arrowhead on the lid points to the ‘closed/
brewing’ symbol on the rim (Fig. 14).
5
Put the thermos jug in the appliance.
E
Tip:
To keep the coffee hot longer, rinse the
thermos jug with hot water to preheat it
before you start brewing coffee.
5
The display shows the set clock time. The
coffeemaker is ready for use.
4.2 Flushing the appliance
You need to flush the coffeemaker once before
first use.
1
Open the water reservoir lid. Fill the water
reservoir with fresh cold water up to the
10-cup indication
. (Fig. 6)
D
Note:
Do not put coffee beans or ground coffee in
the appliance.
2
Close the water reservoir lid.
3
Put the thermos jug in the appliance (Fig. 7).
D
Note:
Make sure the jug lid is on the thermos
jug and the arrow on the lid points to the
‘closed/brewing’ symbol (see chapter ‘Using
the appliance’, section ‘Using coffee beans’).
Also make sure the thermos jug is placed
properly in the appliance. Its spout has to
face forward into the appliance. If the lid is
not on the thermos jug or the thermos jug is
not placed properly in the appliance, the drip
stop function is activated automatically (see
chapter ‘Using the appliance’, section ‘Drip
stop function’).
4
Press the start/standby button (Fig. 8).
• The appliance beeps and the display lights up.
5
Press the pre-ground coffee button to switch
off the grinder (Fig. 9).
• The pre-ground coffee button lights up.
D
Note:
When you switch off the grinder, the number
of cups and the strength setting are not
shown on the display.
6
Press the start/standby button to start the
brewing process (Fig. 10).
• The freshness indicator flashes rapidly on
the display until the brewing process is
finished.
• The coffeemaker produces 5 beeps when
the brewing process is finished.
7
Empty the jug.
ENGLISH