2
Set the on/off switch on the back of the appliance to ‘I’ to switch on
the appliance.
,
The start/standby button and the display light up. If you do not press
any button within 1 minute, the appliance goes into standby mode. In
this case, the display goes out and only the start/standby button stays
on to indicate that the appliance is still switched on. In standby mode,
you can press any button to reactivate the appliance.
3
Open the water reservoir lid. Fill the water reservoir with fresh cold
water up to the 10-cup indication
Note: Do not put coffee beans or ground coffee in the appliance.
4
Close the water reservoir lid.
5
Place the jug on the hotplate.
Note: Make sure the jug lid is in place. Without the jug lid, the drip stop
function is activated automatically (see chapter ‘Using the appliance’, section
‘Drip stop function’).
Note: Make sure you put the jug on the hotplate with the spout facing into the
appliance.
6
Press the start/standby button.
7
Press the pre-ground coffee button to switch off the grinder.
,
The button lights up when you press it.
Note: When you switch off the grinder, the number of cups and the strength
setting are not shown on the display.
EnglisH
8
Содержание HD7751
