Philips HD5730, Руководство пользователя

Страница: 28 / 326

Message Meaning What to do
GROUND TOO
FINE! Adjust mill
- INSERT WATER
SPOUT - Press
hot water
The appliance cannot brew
coffee.
Insert the hot water spout, press the button and
let water run out of the spout for a few seconds.
The coffee is brewed too
slowly.
Turn the grinding coarseness knob clockwise
one setting (see section ‘Regulating the coffee
mill’ in chapter ‘Using the espresso maker’).
INSERT WASTE
BIN
After cleaning, the waste bin
has not been reinserted into
the appliance.
Open the service door and insert the waste bin.
NO GROUND
COFFEE! -Fill
container-
You have selected the ground
coffee function but you have
not put ground coffee in the
appliance.
Add ground coffee (see section ‘Brewing
espresso from ground coffee’ in chapter ‘Using
the espresso maker’).
NO COFFEE
BEANS! -Fill
container-
The coffee beans have run out. Fill the coffee bean container.
If the coffee grinder is very
noisy, this means a small stone
in the coffee beans has blocked
the mill.
Contact an authorised Philips service centre.
LESS GROUND
COFFEE!
The ground coffee funnel is
clogged.
Switch off the appliance and empty the funnel
with the handle of a spoon. Be careful not to
damage the funnel.
You have put too much ground
coffee in the appliance.
Reduce the quantity of ground coffee. Then brew
coffee again.
PLEASE
DESCALE!
This indicates the presence
of scale in the appliance.
Perform the descaling procedure as soon as
possible (see section ‘Descaling’ in chapter
‘Setting menu parameters’).
CLOSE DOOR! The service door is open. Close the service door. If the service door
cannot be closed, make sure that the brewing
unit is inserted correctly (see section ‘Cleaning
the brewing unit’ in chapter ‘Cleaning’).
INSERT
BREWING UNIT!
You have probably not
reinserted the brewing unit
after you cleaned it.
Insert the brewing unit (see section ‘Cleaning the
brewing unit’ in chapter ‘Cleaning’).
GENERIC ALARM! The inside of the appliance is
very dirty.
Switch off the appliance and clean the inside of
the appliance thoroughly, as described in chapter
‘Cleaning’. If the message is still displayed after
you have cleaned the appliance, contact an
authorised Philips service centre.
INSERT WATER
SPOUT!
The hot water spout is not
inserted.
Place the hot water spout in the appliance.
EnglisH
8