Philips HD5730, Руководство пользователя

Страница: 21 / 326

11 Press the OK button.
Hot water comes out of the spout and flows into the bowl below.
The message ‘FLUSHING...’ is shown on the display.
The message ‘FLUSHING - Push OK when ready’ appears on the
display.
When the water tank is empty, the message ‘FLUSHING DONE’
appears on the display.
The descaling program is now finished and the appliance is ready to brew
coffee again.
Note: If the descaling program is interrupted before completion, the appliance
continues to display the message ‘PLEASE DESCALE!’ and you have to start the
program from the beginning again.
setting coffee temperature
1 Press the MENU button.
The button lights up.
Press the
^
button until the message ‘SET TEMPERATURE?’ appears
on the display.
Press the OK button.
Press the
^
or
%
button until the desired coffee temperature is
displayed (low, medium or high).
5 Press the OK button to confirm the temperature selected.
The appliance automatically exits the MENU mode.
setting auto-on time
This function allows you to set a time at which the appliance automatically
switches on.
1 Make sure the clock on the appliance is set as described (see section
‘Setting current time’ in this chapter).
Press the MENU button.
The button lights up.
Press the
^
button until the message ‘SET AUTO-ON?’ appears on
the display.
Press the OK button.
The message ‘AUTO-ON: Disabled’ appears on the display.
5 Press the
^
or
%
or button to set the hour of the auto-on time.
6 Press the OK button to confirm the hour set.
7 Press the
^
or
%
button to set the minutes of the auto-on time.
8 Press the OK button to confirm the minutes set.
The appliance automatically exits the MENU mode.
Note: When you switch off the appliance while an auto-on time is set, the
>
symbol appears next to the time on the unlit display. The clock and the symbol
disappear after 5 minutes.
,
,
,
,
,
,
,
,
EnglisH
1