Philips HD5720, Руководство пользователя

Страница: 27 / 126

Problem Possible cause Solution
The text on the
display is in the
wrong language.
You have set the wrong
language.
If you set the wrong language during the initial
installation procedure, you first have to complete
the installation procedure before the language
can be changed. Consult the Quick Start Guide
guide or the user manual on how to complete the
installation procedure. The installation is complete
when the appliance switches off automatically.
To select another language: (1) Press the on/off
button to switch on the appliance. (2) Press the
MENU button. (3) Press the
%
button twice.
(4) Press the OK button. (4) Select the preferred
language with the
%
and
^
buttons. (5) Press
the OK button.
The coffee is not
hot enough.
The cups have not been
preheated.
To preheat the cups, rinse them with hot water or
leave them on the cup warmer tray on top of the
switched-on appliance for at least 20 minutes.
The coffee temperature is
set too low in the menu.
Increase the coffee temperature in the menu (see
chapter ‘Setting menu parameters).
The coffee is not
creamy enough.
The coffee is ground too
coarsely.
Turn the grinding adjustment knob one setting
anticlockwise.
You have used a wrong type
of coffee.
Use a type of coffee suitable for espresso coffee
makers.
The coffee
flows out of the
spout too slowly.
The coffee is ground too
finely.
Turn the grinding adjustment knob one setting
clockwise.
The coffee flows
out of the spout
too quickly.
The coffee is ground too
coarsely.
Turn the grinding adjustment knob one setting
anticlockwise.
The coffee only
comes out of one
of the two spout
holes.
One of the spout holes is
blocked.
Use a needle to scrape dried coffee residues out
of the blocked spout hole.
When I press the
button for short,
standard or long
coffee, water
instead of coffee
comes out of the
appliance.
The funnel for ground coffee
is blocked.
Switch off the appliance and unblock the funnel
with the handle of a spoon. Then clean the
brewing unit and the inside of the appliance (see
chapter ‘Cleaning’).
The appliance does
not come on when
I press the on/off
button
3
.
The appliance is not plugged
in.
Make sure that the mains plug is in the wall socket.
EnglisH
27