Philips HD TV, Руководство пользователя

Страница: 47 / 61

EN 46
• [Amplifier]
: Streams audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio will continue to stream
from TV speakers if
[EasyLink]
was
selected. If
[EasyLink autostart]
was
enabled, the TV prompts the
connected device to switch to system
audio mode.
Use HDMI ARC
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital
audio to a HDMI Home Theatre System.
HDMI ARC allows you to use Philips
EasyLink to output TV audio directly to a
connected audio device, without the need
for an additional digital audio cable.
Be sure that the device is HDMI-CEC and
ARC compliant, and that the TV is
connected to the device using a HDMI cable
attached to HDMI ARC connectors.
Enable or disable HDMI ARC
Note:
Enabling HDMI ARC automatically
adds the device to the home menu.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[HDMI 1 - ARC]
>
[On]
or
[Off]
.
3. Press
OK
to activate.
Use a CAM
Insert and activate a CAM
*Available on certain models only.
Caution: Be sure to follow the instructions
described below. Wrong insertion of a
Conditional Access Module (CAM) may
damage both the CAM and your TV.
Notes:
•
This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programs with a
high level of copy protection.
• Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.