Philips Hadco ZoneScape 1-A Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 28

Philips Hadco ZoneScape 1-A Скачать руководство пользователя страница 21

ZoneScape 1-A module documentation

.

Proposal

Page

21 of 28

The above setup requires all the ZoneScape modules and the Wireless router to be
configured in the same TCP/IP network.

Limitations:

- The cable length between every ZoneScape unit and the router can't be more than
150 meters without an active repeater / hub

ZoneScape Customizations

The ZoneScape application provides a possibility to edit and add custom zone
naming for every single controller configured in the ZoneScape application.
Furthermore the application provides the possibility to change the name of every
controller configured in the system, allowing the user to add customized references
for the target areas / zones to be controlled.

Naming custom Zones / defining button names

By default the ZoneScape application comes with a default Zone / button naming for
every single controller , configured in the system.

The default zones are :



Pathway



Garden



Pool House



Entertainment / Pool Patio

«
...
19
20
21
22
23
...
»

Содержание Hadco ZoneScape 1-A





























Отзывы:

Нет отзывов