ZoneScape 1-A module documentation
.
Proposal
Page
13 of 28
Example:
In the example Unit 1 and Unit 2 are names picked in order to provisionally name the
two units as one of the unit needs to change its mode from AP (by default) to Client.
Unit 1 (AP mode WiFi SSID Zonescape_8243 )
IP address: 192.168.16.254 (defaults)
PORT 8080 (defaults)
Unit 2 (client mode WiFi SSID ZoneScape_7899 )
IP address: 192.168.16.253
PORT 8080
Unit 2 (
ZoneScape_7899
) needs to be configured to connect to Unit 1
(
Zonescape_8243
) over WI-FI, using the WI-FI credentials used with Unit 1 (The SSID
and the KEY).
By default the credentials are:
SSID:
ZoneScape_xxxx (where xxxx is a unique number that identifies the ZoneScape
unit. )
KEY:
12345678 ( the default WiFi password )
Once the above procedure is completed, then we can enter the Unit 2
(
ZoneScape_7899
) IP parameters in the ZoneScape Application settings tab and we
will have access to both of the units at the same time.
Configuring Unit 2 (
ZoneScape_7899
) in our example in Client mode includes:
1.
Connecting to Unit 2 (
ZoneScape_7899
) via WIFI
2.
Opening a web browser and pointing to the IP address 192.168.16.254
3.
Entering the username and password - admin ; admin
The following page will be loaded: