33
The display of GoGear opus shows
»
Updating firmware
GoGear opus restarts after the
»
firmware is updated and is ready for
use again.
15 Update GoGear
Opus
GoGear opus is controlled by an internal
program called firmware. Newer versions of
the firmware may have been released after you
have purchased GoGear opus.
The software program called
Philips Device
Manager
can use your computer to check for
firmware updates that are available on the
Internet.
Install
Philips Device Manager
on your
computer from GoGear opus or download the
latest version from www.philips.com/support.
Note
Your music files are not affected by a firmware
•
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect GoGear opus to the computer
(see section
Connect and charge
for
instructions).
3
on your computer, click
Start
>
Programs
>
Philips Digital Audio Player
>
Opus Device Manager
to launch
Philips
Device Manager
.
4
Click
Update
»
Philips GoGear Opus Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows
Update
completed
, click
OK
.
6
Disconnect GoGear opus from the
computer.
English
EN
