Philips FWT9200 Series, Руководство пользователя

Страница: 24 / 29

22
EN
11 Other features
Set the alarm timer
This music system can be used as an alarm
clock. You can select disc, radio or USB as alarm
source.
Note
•
If you have set a record timer and an alarm timer, only
the latest timer shall be activated.
1
Ensure that you have set the clock
correctly.
2
Press to switch to standby mode.
3
Press and hold
SLEEP/TIMER
for more
than 2 seconds.
» A prompt to select the source is
displayed.
4
Press CD , or TUNER or USB to select a
source.
5
Press
SLEEP/TIMER
to confirm.
»
The clock digits are displayed and
begin to blink.
6
Press
ALB//-
to set the hour.
7
Press / to set the minute.
8
Press SLEEP/TIMER to confirm.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1
In standby mode, press SLEEP/TIMER
repeatedly.
»
If the timer is activated, s is displayed.
» If the timer is deactivated, disappears.
Tip
•
Bluetooth and MP3 LINK/PC IN mode cannot be
selected as the source of the alarm timer.
•
If disc or USB source is selected but no audio file can
be played, radio is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
»
When sleep timer is activated, is
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
»
When sleep timer is deactivated,
disappears on the display.
Karaoke
You can connect a microphone and sing along
with a music source.
1
Turn
MIC 1 VOL
/
MIC 2 VOL
to the
minimum level.
2
Connect a microphone to the microphone
port on the unit.
3
Press CD , or TUNER , or USB , or PC
IN
/
AUDIO IN
to select the source, and
start play.
4
Sing through the microphone.
• To adjust the volume of the source,
press VOL +/- .
• To adjust the volume of the
microphone, turn MIC 1 VOL / MIC 2
VOL
.