19
English
3139 116 19271
RECORDING
CLOCK
TIMER
AM
SHUFFLE
REPEAT
PROGRAM
STEREO
TIMER
FM
REPLAY
REC
HSD
MAX
PM
LW
MW
NEWS
CD
TUNER
TAPE
AUX
STANDBY.ON
CD
1 • 2 • 3
BAND
TAPE 1 • 2
VIDEO
n
TIMER
CLOCK
PROGRAM
RDS
NEWS!
DEMO
TUNING
▲
▲
▲ ▲
STOP•CLEAR
SEARCH
PLAY
PAUSE
PREV
NEXT
PRESET
▲
▲
I S
DBB
DUBBING
NORM•FAST
RECORD
A. REPLAY
MASTER VOLUME
OPTIMAL
DBB
JAZZ
TECHNO
ROCK
DIGITAL SOUND CONTROL
DSC
INCREDIBLE SURROUND
View Clock
You can view the clock (if it is set) at
standby or any source mode. It will be
displayed for about 7 seconds.
• Press
CLOCK/TIMER
briefly.
™
“
10:25
” (the current time) will be
displayed.
™
“
--:--
” will be displayed if the
clock is not set.
Clock Setting
The clock is set in 24-hour mode, e.g.
“
00:00
“ or “
23:59
“. Before setting the
clock, you must be in the View Clock mode.
1
Press
CLOCK/TIMER
to select clock
mode.
™
“
00:00
” or the current time starts
flashing.
™
“
à
,
á
,
í
,
ë
,
Ç
” light up.
2
Set the hour with␣
à
or
á
.
3
Set the minute with␣
í
or
ë
.
4
Press
CLOCK/TIMER
again to store the
setting.
™
The clock starts running.
• To exit without storing the setting, press
Ç
.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
– To set the time with RDS clock, see
"Receiving RDS Radio Station" under
TUNER section.
CD Synchro Start Recording
1
Load a blank tape into tape deck 2 and a
disc into the disc tray.
2
Press
CD
to select CD mode .
™
You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not, the
tracks are recorded according to the
selected disc.
3
Press
RECORD
to start recording.
™
REC flag starts flashing.
• CD will start playback automatically.
4
Press
STOP
Ç
to stop recording.
Recording from other sources
(only on tape deck 2)
1
Load a blank tape into tape deck 2.
2
Press
CD
,
TUNER
or
AUX
.
• Start playback of the selected source.
3
Press
RECORD
â
to start recording.
™
REC flag starts flashing.
4
Press
STOP
Ç
to stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
Timer Setting
• The system can switch on to CD,
TUNER or TAPE 1 mode automatically at
a preset time. It can serve as an alarm
to wake you up. After half an hour from
the preset time, the system will return
to the standby mode if no button is
pressed.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will be at
the last setting before the set is
switched to standby mode.
1
Press and hold
CLOCK/TIMER
for more
than 2 seconds to select timer mode.
™
“
ON
00:00
” or the last set timer
starts flashing. The TIMER flag
flashes.
™
The last selected source is lighted
while other available sources are
flashing.
™
“
à
,
á
,
í
,
ë
,
Ç
” light up.
2
Press
CD
,
TUNER
or
TAPE
to select the
desired source.
3
Press␣
à
or
á
to set the hour for the
timer to start.
4
Press␣
í
or
ë
to set the minute for
the timer to start.
Untitled-1
6/15/00, 2:05 PM
19