16
EN
•
Dimensions (WxHxD):
160 x 300 x 160 mm
•
Weight: 3.8 kg
Surround speakers
•
Speaker impedance: 8 ohm
•
Speaker drivers: 2 x 63.5 mm (2.5") full
range
•
Dimensions (WxHxD):
160 x 110 x 160 mm
•
Weight: 1.0 kg/each
Subwoofer
•
Power supply: 110-240 V~, 50/60 Hz
•
Power consumption: 30 W
• Standby power consumption: ≤ 0.5 W
•
Impedance: 4 ohm
•
Speaker drivers: 1 x 165 mm (6.5") woofer
•
Dimensions (WxHxD):
220 x 440 x 220 mm
•
Weight: 5.4 kg
Remote control batteries
•
2 x AAA-R03-1.5 V
6 Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on this product do not work.
•
Disconnect this product from the power
supply for a few minutes, then reconnect.
Sound
No sound from the speakers of this product.
•
Connect the audio cable from this product
to your TV or other devices. However, you
do not need a separate audio connection
when:
•
this product and TV are connected
through
HDMI ARC
connection, or
•
a device is connected to the
HDMI IN
connector on this product.
•
Reset this product to its factory settings
(see 'Apply factory settings' on page 15).
•
On the remote control, select the correct
audio input.
•
Make sure that this product is not muted.
No sound from the wireless surround
speakers.
•
Wirelessly connect the speakers to the
main unit (see 'Pair up with the speakers'
on page 9).
•
Dock the wireless surround speakers into
the main unit to charge the battery.
