15
English
EN
3
Select and play audio files or music on
your NFC device.
•
To break the connection, tap again the
NFC device with the
NFC
tag on this
product.
Auto standby
If no audio/video playback is detected from a
connected device for 30 minutes, this product
automatically switches to standby.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In OPTICAL mode, press and hold
RESET
for five seconds.
»
When the factory settings restore is
complete, the product automatically
switches off and restarts.
5 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
•
Total output power:
210W RMS (+/- 0.5 dB, 30% THD) /
168W RMS (+/- 0.5 dB, 10% THD)
•
Frequency response:
20 Hz-20 kHz / ±3 dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUDIO-IN: 500 mV
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
Bluetooth
•
Bluetooth profiles: A2DP
•
Bluetooth version: 2.1 + EDR
Main unit (left and right base
speakers)
•
Power supply: 110-240 V~, 50/60 Hz
•
Power consumption: 50 W
•
Standby power consumption: ≤ 0.5 W
•
Speaker impedance:
•
Woofer: 8 ohm
•
tweeter: 8 ohm
•
Speaker drivers:
2 x 76 mm (3”)
2 x 25.4 mm (1”) tweeter
