background image

FC9056

ELECTRICAL DIAGRAM

DISASSEMBLY- AND  RE-ASSEMBLY ADVISE

-  To open the apliance, 

First remove the filter cover 
(

item 24

) then remove the 

vario knob button (

item 11

with a screwdriver as shown 
in the picture.

-  To remove the button panel (

item 13

), first loosen 

mounting screws (

A

), now by using a screwdriver unlock 

the 4 snap connection and separate the panel from the 
housing. (see picture)

-  Display cover (

item 12

) now can easely be removed from 

the button panel.)

-  To remove the motor, you need a torx screwdriver with a 

14.5cm long shank. Screwdriver 9965 000 08332 can be 
used.

REPAIR INSTRUCTION

-  Cotton dustbags, are used in countries in which paper 

dustbags are not available.

-  If the reel half spring unit is replaced, shaft 

G

 must be 

lubricated with 

silicone grease

.  Do not apply any silicone 

grease to or spill any grease on terminals (

39

) or conductors 

(

38

).

Item 37

 is provided with a long cord-winder spring, but 

both long and short cords can be used in combination with 
this spring.  (L = 9.3 m)

-  Depending on the original cord, the spare cord must be 

shortened to the length of the original cord.

-  The cord winder spring must be tensioned to the maximum 

level and then be rewound approx. 1.5 turn 

Item 10

, air valve, opens to cool the motor if the air 

displacement is too low or if the airflow is blocked.

-  To adjust the telescopic tube (

item 46

) to the required 

length, push the adjustment collar in the direction of the 
arrow while sliding the top section of the telescopic tube 
into or out of the lower section.

-  If the function of the electronic control unit (

item 15

) is 

not required, the Triac must be short-circuited in the 
manner shown in the circuit diagram. 

-  When the vacuum cleaner is used to suck up fine dust the 

pores of the dustbag may become clogged, causing the 
passage of air through the dustbag to become obstructed. 
As a result, the dustbag-full indicator will indicate that the 
dustbag needs to be replaced, eventhough the dustbag is not 
full at all.

Triac

iac

Short-circuit

t

Short-circui

circu

Short-circuit

MOTOR
POWER

MODULE

Black

Black/White

Brown

Blue

CORD WINDER

M

2-7

Содержание FC9056








Отзывы: