– 10 –
Replacing the ink film
The ink film supplied with your fax machine has a protective strip that must be removed before you load it.
You cannot receive or copy documents unless an ink film is loaded in the fax machine.
CHECK
DISPLAY
If the ink film is finished or if there is no ink film in the fax machine, the
CHECK DISPLAY light flashes, and the following message appears:
refill inkfilm
Before loading a new ink film you must remove the paper from the paper feed
mechanism.
Also follow the instructions on your ink film packaging!
To obtain optimum quality, please use only ink films as specified on your original roll.
For safety reasons, do not use any other brands because they can damage your fax
machine.
Open the machine by carefully lifting the operation panel at the recess in the middle.
If you hear a slight click, the panel has latched into place.
Removing the old ink film
2
1
1
4
3
1. Open the ink film cover by
pressing the blue release levers
back with both hands.
2. Then carefully fold the ink film
cover back.
3. Press the empty ink film roll on the
left-hand side against the
spring.
4. Lift the roll upwards on the left
side in order to lift it out of its seat.
5. Remove both ink film rolls. They
cannot be reused. Dispose of the
ink film rolls with normal waste.
Load a new ink film, because your
fax machine cannot work correctly
without it.
If, on replacing the ink film, you notice that the colour of the grey printer roller has discoloured to black, you must clean
the roller (see chapter 9 Troubleshooting/Care and maintenance instructions)