Philips EXP51117, Руководство пользователя

Страница: 7 / 16

Batteries
(supplied or optionally available)
Inserting batteries
Open the battery compartment and insert
2 alkaline batteries of type
AA ( LR6 , UM3 ).
Do not use old and new or different types of
batteries in combination.
Indication of empty batteries
●
Replace the batteries or connect the
mains adapter as soon as
A blinks and
Replace batteries is scrolled.
Remove batteries if they are empty or if the
set will not be used for a long time.
Batteries contain chemical substances,
so they should be disposed of properly.
Average playing time of batteries under normal conditions:
Alkaline ECO-PLUS
batteries NiMH batteries
ESP on 10 hours 5 hours
ESP and powersaving on:
Audio disc 15 hours 7 hours
MP3-CD 20 hours 10 hours
Note:To switch on powersaving, press ESP repeatedly during
playback until
is shown (see “ESP and powersaving”).
13
Power supply
English
Firmware upgrade
Occasionally, Philips releases new software (“firmware”) for your set.
1
Connect the mains adapter to 4.5V DC on the set and to the wall socket
(see “Mains adapter”).
2
Keep MODE pressed for 3 seconds.
➜
The type of your set and the current version of the firmware are displayed.
Upgrade? is displayed.
3
Press
9
.
4
Visit the Philips Audio homepage www.audio.philips.com. Check if there is
a firmware file for your set and if the firmware version is higher than the
current version of your set. Download the file and burn it on a CD-ROM.
5
Insert the CD-ROM into the set and keep MODE pressed for 3 seconds.
➜
Upgrade? is displayed.
6
Press
2;
:
➜
Upgrading is displayed and upgrading starts.This may take some minutes.
After upgrading is finished, Upgrade complete is scrolled.
➜
Wrong upgrade file is scrolled:Your set already has the latest firmware
or the downloaded file does not correspond to your set.
➜
Upgrade file defect is scrolled:The upgrade file has been damaged
during the download or when burning the CD-ROM. Download the file
again, burn a new CD-ROM and try again.
➜
No upgrade file is scrolled: No upgrade file was found on the inserted
CD-ROM.
Note: If upgrading is interrupted accidentally, repeat step 6 until upgrading
is completed successfully.
12
General information
English
EXP511,513/00c.1 eng 1/3/02 15:11 Page 12