Mains adapter
Use only the AY 3170 mains adapter (4.5 V/300 mA direct current, positive
pole to the centre pin). Any other product may damage the set.
1
Make sure the local voltage corresponds to
the adapter´s voltage.
2
Connect the mains adapter to 4.5V DC on
the set and to the wall socket.
Note: Always disconnect the adapter if you are
not using it.
Headphones (SBC HE 545)
●
Connect the supplied headphones to
LINE OUT/
p
.
Note:
LINE OUT/
p
can also be used for
connecting this set to your HiFi system. Set
VOL
E
on this set to position 8 and adjust
volume and sound with your HiFi system.
Use your head when using headphones
Hearing safety
Do not play your headphones at a high volume. Hearing experts advise that
continuous use at high volume can permanently damage your hearing.
Traffic safety
Do not use headphones while driving a vehicle. It may create a hazard and it
is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you.
15
Power supply/Headphones
English
ECO-PLUS NiMH batteries
(for versions supplied with
ECO-PLUS NiMH batteries AY 3362 only)
Recharging works only on a set with supplied rechargeable ECO-PLUS
NiMH batteries AY 3362.
Recharging the ECO-PLUS NiMH batteries
1
Insert the 2 rechargeable ECO-PLUS NiMH batteries AY 3362.
2
Connect the mains adapter to 4.5V DC on
the set and to the wall socket.
➜
Charging batteries
is scrolled once.
While the battery symbol is changing,
the set is recharging the NiMH batteries.
3
When the batteries are fully recharged,
is shown and
Charge full
is displayed.
ECO-PLUS NiMH battery information
Recharge only the supplied NiMH batteries AY 3362. Do not recharge any
other type of batteries.
Recharging takes approximately 7 hours. Recharging stops during playback.
Recharging full or half-full batteries will shorten the battery lifetime.
Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few
times, discharge them completely before recharging.
To avoid a short circuit, the batteries should not touch any metal objects.
If the batteries quickly become empty after recharging, the contacts are dirty
or the end of the battery lifetime has been reached.
14
Power supply
English
EXP511,513/00c.1 eng 1/3/02 15:11 Page 14
Содержание EXP51117
Страница 1: ...EXP511 513 00c 1 eng 1 3 02 15 11 Page 1 ...