Philips ErgoLine D310 Скачать руководство пользователя страница 60

Страница: 60 / 88

ErgoLine D330/D340
Customer Engineer Manual

Page 2-40

Installing the Direct Station Select (DSS) Options

Up to three DSS options can be added to an ErgoLine D340 terminal.

To install DSS options, proceed as follows:

Note

: The DSS module requires an external power supply to be fitted.

WARNING

: Do not fit the DSS module when line or external power is

connected.

1. Turn the ErgoLine terminal upside down.

2. Remove the line cord (if connected).

3. Remove the DSS/DSS cover from the base of the terminal by removing the

screws.

IGURE

2-8. I

NSTALLING THE

DSS O

PTIONS

4. Remove the external power supply if fitted.

5. Plug the DSS option into the slot in the base of the terminal or to the existing

DSS.

6. Fit the external power supply, routing the cable in the slot in the base.

7. If no further DSS modules are to be fitted, place the cover on the DSS module

and secure it with the screws.

8. Secure the DSS to the bottom case using the two screws provided.

Содержание ErgoLine D310

























































































Результаты поиска

Содержание ErgoLine D310

Отзывы:

Philips ErgoLine D310, Руководство пользователя, Страница: 60 / 88

Результаты поиска

Содержание ErgoLine D310

Отзывы: