manualshive.com logo in svg

Philips ErgoLine D310, Руководство пользователя, Страница: 28 / 88

Поделиться
Скачать
Philips ErgoLine D310 Скачать руководство пользователя страница 28

ErgoLine D330/D340
Customer Engineer Manual

Page 2-8

6.  Press Shift, Hold.

The following display will appear on the screen:

7.  Scroll down until the 

Set TEI

 option is displayed and press OK key.

The following display will appear on the screen:

8.  Enter 0 or 1 to change the TEI number, then press the OK key to accept the

new setting.

The following display will appear on the screen:

Note

: This display will be shown only for a few seconds.

Note

: The TEI must be granted by the network. If the TEI is not supported, the

display will show the message 

TEI Denied

 

indicating that another terminal

already occupies the specified TEI i.d. The terminal TEI i.d. needs to be changed
to a unique value before it will be accepted.

If the set remains non-operational after setting the TEI, the message 

TEI Denied

can be displayed by pressing the down arrow key.

Note

: If the TEI has been changed it is necessary to remove and re-insert the line

cord for the change to take effect.

Connecting the D340 ErgoLine Terminal

The D340 ErgoLine terminal is connected as follows:

1.  Connect the handset cord to the handset port on the underside of the

ErgoLine terminal and put the handset on the cradle.

2.  Connect the data terminal to the V.24 data port.

3.  Connect any other equipment to the appropriate connectors as necessary:

• 

PC interface

• 

Audio interface

• 

Static interface

4.  Connect the mains plug transformer to the mains supply (only for mains

powered terminals). The idle menu will be on the display.

5.  Connect the telephone line cord to the line port on the underside of the

ErgoLine terminal.

6.  Plug in the telephone line cord at the PNT1 or the wall socket.

Clear All Keys?

 

↓

TEI:0

TEI Set!

[

↕

 Scroll, OK accept]

                 

[Enter 0 or 1, OK] 

Содержание ErgoLine D310

























































































Отзывы:

Нет отзывов