DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 17
.......................................
March 5, 2019
www.lighting.philips.com/dynalite
Signify Classified - Internal
2.8
Preset Editor
This editor should only be used for diagnostic purposes.
The Preset Editor displays the available presets on the load controller. To create and edit presets, use the Area
Preset editor in Logical View. For more information, refer to the System Builder Training Guide.
2.9
Port Editor
The DDRC-GRMS-E supports an Ethernet trunk/spur and DyNet spur. The Port Editor allows you to add and
configure IPv4/IPv6 addresses and ports to define the trunk and spur topology of the system or to connect to a
third-party device/system.
IPv4 system with RS485 spur.
