DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 15
.......................................
March 5, 2019
www.lighting.philips.com/dynalite
Signify Classified - Internal
2.5
Connection Settings
For configuration purposes, you can connect System Builder to the controller via UDP Multicast
(Ethernet) or Serial Connection (DyNet RS-485).
Refer to the SB Quick Start Guide or SB training Guide for more information.
2.6
Create Device
The Create Device page is only required if pre-commissioning devices. It enables offline creation
of devices on the spur connected to the DDRC-GRMS-E, such as load controllers, user interfaces
and sensors.
Refer to the SB Quickstart Guide or SB training Guide for more information.
