Philips DTR3030M, Руководство пользователя

Страница: 60 / 78

16
3 Section for Advanced Usage
WARNINGS
Changing some parameters of the menu could affect the correct operation of the receiver. Read then this section
of the guide carefully before proceeding with adjustments. Some functions are protected by a security code to
avoid tampering (see par. 3.6.1.4).
During normal vision of a program, by pressing the MENU button on the remote control, the Principal Menu will
appear on screen, where there are the following main submenu:
1.
Installation
2. Channel Manager
3. Multimedia
4.
Applications
5. Pay Per View Services
6. Settings
GENERAL RULES FOR THE NAVIGATION
To navigate between various menus use:
Arrow buttons
, , ,
to select menu, sound and options.
The OK key to open a menu or confirm a choice.
The keys 0-9 to enter a numeric value.
The
TEXT
button to bring up the virtual keyboard on screen at proper text-entry fields in the portal of
internet applications.
The EXIT button or BACK , in general, allows you to exit the menu or return to the preceding current one.
Also refer to any indications given in the various menus, which specify how to implement a function through a
payment button on the remote control.
3.1 Installation Menu
Submenu:
1. Channel Scan
2. Reset Receiver
3.1.1 Channel scan
During the first installation, available channels will be automatically searched. Periodically, during the activation
of new television and radio services or changing broadcasters, it is suggested to keep updated the channel list
of the receiver.
Only if you use an active antenna to be supplied with 5V through the coaxial cable connected to the input of RF
IN antenna of the receiver, press the Red button to turn it on (press it again to turn it off).
WARNING
If you use a classical roof antenna or an antenna already energized, antenna power must be stayed off:
risk of
overload!
3.1.1.1 Automatic search
To scan channels on all frequencies available, proceed as follows:
Set the Scan Mode parameter.
Then press the Green button on the remote control to start the automatic channel search.
3.1.1.2 Manual search
To scan to a specific channel (for advanced users), follow the steps described below:
Set Manual Scan Mode .
Choose Number Channel /Frequency of the interested channel
Then press the Green button on the remote control to start the channel search.
Philips DTR3030M